Motor Protection Atex & IECEx

MOTREX SERIES

The Ex motor protection (hazardous areas) has been designed to get in one device the ability to protect one electric tri-phase motor in zones with explosives atmospheres (hazardous areas) and to start and stop that motor.

It’s formed by two components: Motor protector, and a selector controler with starts and stop.

The design has been made on a waterproof and antirust enclosure with AISI 304L stainless steel. This design way allows us to use this device in protected spaces with high explosion risk, getting this manner, the “Ex e” and “Ex d” protection types in potentially explosive atmospheres of dust and gas.

It can be used in any industry considered as an industry with explosive atmosphere in dust or gas places, like be oil & gas, chemistry, petrol chemistry, petrol, offshore industry, etc.

Motor Protection Atex & IECEx · Atex DelvalleAtex Delvalle
Motor Protection Atex & IECEx · Atex DelvalleAtex Delvalle
Motor Protection Atex & IECEx · Atex DelvalleAtex Delvalle

This product has the following certificates

  • Logo Atex · Atex Delvalle
  • Logo CE · Atex Delvalle
  • Logo IECEx · Atex Delvalle
  • Logo IK10 · Atex Delvalle
  • Logo IP6x · Atex Delvalle

Description

The Ex motor protection has been designed to get in one device the ability to protect one electric tri-phase motor in zones with explosives atmospheres and to start and stop that motor.

It’s formed by two components:

•As internal component it just has one motor protector, which protects the motor against heavy electric problems, like short-circuits, overloads and motor or circuit phase failures.

•It has a selector, the only one control component. It starts the motor with ON position (1) and stops it with OFF one (2).

The design has been made on a waterproof and antirust enclosure with AISI 304L stainless steel. This design way allows us to use this device in protected spaces with high explosion risk, getting this manner, the “Ex e” and “Ex d” protection types in potentially explosive atmospheres of dust and gas.

It can be used in any industry considered as an industry with explosive atmosphere in dust or gas places, like be oil & gas, chemistry, petrol chemistry, petrol, offshore industry, etc.

Discover the advantages

· A really important advantage about using this device, is that it can work with a lower temperature than the ranges say, being possible to work, in some many unfavourable places, with -25°C in gas group IIB 

· This Ex motor protection’s design avoids placing fuse to protect the electrical line against short-circuits or over loads.

· Thanks to this device, the motor useful life will be longer, because it’s protected against many electric problems.

· The enclosure can be manufactured with AISI 316L stainless steel.

 

Regulations

ATEX directive and regulation:
- ATEX directive 2014/34/EU

- EN 60079-0:2012

- EN 60079-1:2007

- EN 60079-7:2015

- EN 60079-31:2010

IECEx regulation:
- IEC 60079-0:2011

- IEC 60079-1:2006

- IEC 60079-7:2015

- IEC 60079-31:2013

Enclosure regulation:

- IP regulation (IP65): IEC 60529
- IK regulation (IK10): IEC 62262

Low voltage directive and regulation:

- Directive 2014/35/UE

- EN 61439-12011

- EN 61439-22011

 

 

Applications

APPLICATIONS

Specially designed for the following areas where facilities require additional safety atex:
- Oil & Gas.
- Offshore & High sea.
- Industry and automation.
- Chemical and refineries.
- Pharmaceutical.
- Maritime and port.
- Fieldstations.
- Food & Beverage.
- Paper industry.
- Air transport.
- Nuclear and renewable.

And in general, hazardous areas and explosive atmospheres where flameproof equipment are necessary.

Custom Made Solutions
We offer multiple solutions

Motor Protection Atex & IECEx · Atex Delvalle
Do you need ATEX solutions?
2021 product catalogues

· Low voltage auto trip which switches off the motor if there was a fallen voltage.

· Auxiliary contact normally closed and normally opened.

· We recommend adding an ammeter to check the current inside the circuit.

· Box made in AISI 316L stainless steel to marines or highly corrosive places.

· Possibility of using it with low temperature -25°C with IIB gas group.

· Cable glands available in any size and thread.

Motor Protection Atex & IECEx · Atex Delvalle

Sketches

Motor Protection Atex & IECEx · Atex Delvalle
The Heydar Aliyev Baku Oil Refinery · Atex Delvalle
Azerbaijan
The Heydar Aliyev Baku Oil Refinery is an oil refinery located in Baku, Azerbaijan. It is...
Mers el-Kébir “The Great Harbor” · Atex Delvalle
Algeria
Mers el Kebir is a port on the Mediterranean Sea near Oran, northwest Algeria. The name of the...
FPSO for Carioca by Petrobras · Atex Delvalle
Brazil
The field is 100% operated by Petrobras and is situated in the Campos Basin in the northern region...
Industry 4.0 - HMI Cepsa · Atex Delvalle
Spain
The Industry 4.0 concept corresponds to a new way of organizing the means of production. The...
Nuclear Power Station · Atex Delvalle
Spain
Delvalle is very conscious to any possible risks that may have nuclear power.
Singapore FPSO’S · Atex Delvalle
Singapore
Floating production, storage and Offloading-Tanker Oil Refinery
Johan Sverdrup Field · Atex Delvalle
Norway
Several drilling platforms Oil & Gas Offshore at North Sea.
Military Ports · Atex Delvalle
Spain
Atex Delvalle is very sensitive to any possible risks that may have the facility ...
Port of Dunkerque · Atex Delvalle
France
Dunkerque is a town that has been featured in several historical episodes....
Petrokemya · Atex Delvalle
Saudi Arabia
Sabic Corporation is a leader in the petrochemical industry.
Project Johan Sverdrup Equinor · Atex Delvalle
Norway
The Johan Sverdrup field is a technological triumph and a milestone for the Norwegian oil industry,...
Pemex · Atex Delvalle
Mexico
Petróleos Mexicanos (PEMEX) is the biggest enterprise in Mexico and South America.
{{thanks}}rating 5 out of 5. Total votes: 1.